Influencia de los macrodiseños de implantes en la estabilidad primaria y secundaria del implante

Mauricio Toro, Javier Leitao, Gloria Sánchez, Tomás Yoma, Eduardo Fernández, Alain Manuel Chaple Gil

Texto completo:

PDF (English)

Resumen

Introducción: los implantes Cónicos han demostrado que gracias a su macro diseño son capaces de expandir el lecho quirúrgico realizado por el cirujano, lo que en la práctica clínica da una sensación de mayor estabilidad, sin embargo, ella es altamente subjetiva y dependiente del operador.

Objetivo: analizar la influencia del diseño del implante en la estabilidad primaria y secundaria mediante análisis de frecuencia de resonancia y Torque de Inserción.

Métodos: 38 implantes Tipo Tornillo y Tipo Cónico fueron colocados en 18 pacientes en el programa de Implantología Bucomáxilofacial de la Universidad de Chile durante el año 2006 y 2007 en maxilares de hueso tipo II o III según Leckholm y Zarb. Se midió la estabilidad implantaria, coeficiente de estabilidad del implante (ISQ), a través de Ostell® mentor al momento de la instalación (ISQ1) y luego en la conexión (ISQ2) y  el  Torque de Inserción a través de el motor Osseoset®: 17 implantes Tipo Tornillo de área de contacto promedio aproximada de 237mm2 (3.75/15mm; 3.75/13mm) y 17 implantes Tipo Cónico de área de contacto promedio aproximada de 226mm2 (4.3/13mm; 4.3/16mm).

Resultados: Los promedios de ISQ1 e ISQ2 y Torque de Inserción respectivamente para implantes de área contacto aproximada de 237mm2 fue de 71,3 ISQ1, 66,6 ISQ2 y 44,52Ncm; para implantes de 226mm2 fue de 75 ISQ1, 72,5 ISQ2 y 48,82Ncm.

Conclusión: Los implantes de área contacto promedio aproximada de 226mm2 (Tipo Cónicos) presentan estabilidad primaria y secundaria significativamente mayor a los de área contacto promedio aproximada de 237mm2 (Tipo Tornillo). (Promedio ISQ1: p= 0.0473; Torque de Inserción: p=0.0031 y Promedio ISQ2: p=0.0039)

Palabras clave

implante dental; hueso; mandíbula; maxilar

Referencias

Naroa Lozano-Carrascal, Oscar Salomó-Coll, Marta Gilabert-Cerdà, Nuria Farré-Pagés, Jordi Gargallo-Albiol, Federico Hernández-Alfaro. Effect of implant macro-design on primary stability: A prospective clinical study. Med Oral Patol Oral Cir Bucal. 2016 Mar; 21(2):e214-21. doi: 10.4317/medoral.21024

Andreas Vollmer, Babak Saravi, Gernot Lang, Nicolai Adolphs, Derek Hazard, Verena Giers, Peter Stoll. Factors Influencing Primary and Secondary Implant Stability—A Retrospective Cohort Study with 582 Implants in 272 Patients. Appl. Sci. 2020; 10(22):80-4. doi: https://doi.org/10.3390/app10228084

Kim, H. M., Cho, J., & Ryu, J. (2019). Evaluation of implant stability using different implant drilling sequences. J Dent Sci. 2019 Jun; 14(2): 152-6. doi: 10.1016/j.jds.2019.03.006

Sargolzaie N, Samizade S, Arab H, Ghanbari H, Khodadadifard L, Khajavi A. The evaluation of implant stability measured by resonance frequency analysis in different bone types. J Korean Assoc Oral Maxillofac Surg. 2019 Feb; 45(1):29-33. doi: 10.5125/jkaoms.2019.45.1.29

Miri R, Shirzadeh A, Kermani H, Khajavi A. Relationship and changes of primary and secondary stability in dental implants: A review. Int J Contemp Dent Med Rev. 2017; 2017:1-6. doi: 10.15713/ins.ijcdmr.112

Valderrama P, Oates TW, Jones AA, Simpson J, Schoolfield J, Cochran DL. Evaluation of Two Different Resonance Frequency Devices to Detect Implant Stability: A Clinical Trial. J Periodontol. 2007 Feb;78(2):262-72. doi: 10.1902/jop.2007.060143

Baftijari D, Benedetti A, Kirkov A, Iliev A, Stamatoski A, Baftijari F, Deliverska EG, Gjorgievska E. Assessment of Primary and Secondary Implant Stability by Resonance Frequency Analysis in Anterior and Posterior Segments of Maxillary Edentulous Ridges. J of IMAB. 2018 Apr-Jun;24 (2):2058-64. DOI: 10.5272/jimab.2018242.2058

Kastala VH, Ramoji Rao MV. Comparative evaluation of implant stability in two different implant systems at baseline and 3–4 months intervals using RFA device (OSSTELL ISQ). Indian J Dent Res. Sep-Oct 2019;30(5):678-86. doi: 10.4103/ijdr.IJDR_446_17.

Dayan C, Geckili O, Bural C. The influence of implant shape on primary stability of implants with a thread cutting and forming design: an ex vivo study. J Oral Implantol. 2019 Jun;45(3):181-5. doi: 10.1563/aaid-joi-D-18-00158

O'Sullivan D, Sennerby L, Meredith N. Influence of implant taper on the primary and secondary stability of osseointegrated titanium implants. Clin Oral Implants Res. 2004 Aug;15(4):474-80. doi: 10.1111/j.1600-0501.2004.01041.x.

O'Sullivan D, Sennerby L, Jagger D, Meredith N. A comparison of two methods of enhancing implant primary stability. Clin Implant Dent Relat Res. 2004;6(1):48-57. doi: 10.1111/j.1708-8208.2004.tb00027.x.

O'Sullivan D, Sennerby L, Meredith N. Measurements comparing the initial stability of five designs of dental implants: a human cadaver study. Clin Implant Dent Relat Res. 2000;2(2):85-92. doi: 10.1111/j.1708-8208.2000.tb00110.x.

Toro M, Leitao J, Sánchez G, Díaz L, Chaple Gil AM, Fernández E. Simplified method to quantify the osseointegration area of dental implants. Rev Cubana Invest Bioméd. [Internet] 2020 [Cited: 4/05/2021];39(3):e651. Available in: http://www.revibiomedica.sld.cu/index.php/ibi/article/view/651

Sakoh J, Wahlmann U, Stender E, Al-Nawas B, Wagner W. Primary Stability of a Conical Implant and a Hybrid, Cylindric Screw-Type Implant In Vitro. Int J Oral Maxillofac Implants. [Internet] 2006 [Cited: 4/05/2021];21(4):560–6. Available in: https://pubmed.ncbi.nlm.nih.gov/16955606/

Menicucci G, Pachie E, Lorenzetti M, Migliaretti G, Carossa S. Comparison of primary stability of straight-walled and tapered implants using an insertion torque device. Int J Prosthodont. [Internet] Sep-Oct 2012[Cited: 4/05/2021];25(5):465-71 Available in: https://pubmed.ncbi.nlm.nih.gov/22930768/

Rokn A, Ghahroudi AR, Mesgarzadeh A, Miremadi A, Yaghoobi S. Evaluation of stability changes in tapered and parallel wall implants: a human clinical trial. J Dent (Tehran). [Internet] 2011 Autumn[Cited: 4/05/2021];8(4):186-200. Available in: https://www.ncbi.nlm.nih.gov/pmc/articles/pmid/22509458/

Barikani H, Rashtak S, Akbari S, Fard MK, Rokn A. The effect of shape, length and diameter of implants on primary stability based on resonance frequency analysis. Dent Res J (Isfahan). [Internet] 2014 Jan[Cited: 4/05/2021];11(1):87-91. Available in: https://www.ncbi.nlm.nih.gov/pmc/articles/pmid/24688566/

Romanos GE, Basha-Hijazi A, Gupta B, Ren YF, Malmstrom H. Role of clinician’s experience and implant design on implant stability. An ex vivo study in artificial soft bones. Clin Implant Dent Rela Res. 2014 Apr;16(2):166-71. doi: 10.1111/j.1708-8208.2012.00470.x.



Licencia de Creative Commons
Esta obra está bajo una licencia de Creative Commons Reconocimiento-NoComercial 4.0 Internacional.