Magnetite Synthesized with Ferric Chloride and Ferrous Sulfate versus Commercial Magnetite Nanoparticles in Mercury Removal: Comparative Study
Keywords:
Mercury pollution; synthesized magnetite; magnetite nanoparticlesAbstract
Introduction: Water contamination with mercury is a global problem, with several alternative solutions whose effects must be evaluated in order to select the most optimal treatment.
Objective: To evaluate the adsorption capacity of magnetite nanoparticles using ferrous sulfate (FeSO4) and ferric chloride (FeCl3) precursors, comparing them with the use of commercial magnetite nanoparticles.
Methods: The magnetite synthesis was carried out by co-precipitation using ferrous sulfate and ferric chloride, and sodium hydroxide as precipitating agent, to obtain magnetite nanoparticles the solution reaches a pH range of 8-12. Subsequently, it was characterized by SEM, determining morphology and particle size, and IR spectrophotometry analysis to verify composition. Additionally, commercial magnetite nanoparticles were purchased to compare the effectiveness of the two materials. Mercury removal was evaluated using adsorption spectrophotometry equipment.
Results: The synthesized and commercial nanoparticles achieve a mercury removal percentage of around 75% and 100% respectively (Contact time-4 hours). When analyzing the pH, the highest adsorption capacity is reached at a value of 7 and decreases when the solution becomes basic. The commercial nanoparticles (0.963 to 0.482 µm) present greater uniformity than the synthesized ones (1.836 to 0.113 µm).
Conclusions: Commercial magnetite nanoparticles have better efficiency in removing mercury, reaching a percentage of 100% in the first 10 min, while the synthesized nanoparticles have a removal of 74.88% in 4 hours.Downloads
Downloads
Published
How to Cite
Issue
Section
License
Authors who publish in this journal agree to the following terms: Authors retain copyright and grant the journal the right of first publication, with the work simultaneously licensed under the Creative Commons Attribution-NonCommercial License (CC BY-NC 4.0), which allows others to share the work provided that its authorship and initial publication in this journal are acknowledged. Authors may enter into separate, additional agreements for the non-exclusive distribution of the published version of the work (e.g., posting it to an institutional repository or publishing it in a book), provided that its initial publication in this journal is acknowledged. Authors are permitted and encouraged to share their work online (e.g., in institutional repositories or on their personal website) before and during the submission process, as this can lead to productive exchanges and increase citation of the published work (see The Effect of Open Access).
As the Revista Cubana de Investigaciones Biomédicas is part of the SciELO network, once articles have been accepted into the editorial process (peer review), authors may, if they agree, deposit them in SciELO Preprints and update them there once the review process and layout proofs are complete.
